| GTV
85 |
GTV
125 |
||
 |
|
|
|
| Closing power | kN | 850 | 1200 |
| Opening stroke | mm | 150-330 | 200-400 |
| Minimum mould thickness |
mm | 120-370 | 200-500 |
| Platens dimensions | mm | 500x500 | 630x630 |
| Space between columns | mm | 320x320 | 401x401 |
| Screw diameter | mm | 36/45 | 45/55 |
| Ratio lenght/diameter screw | mm | 17/22 | 21/18 |
| Real injection capacity | g | 220/340 | 400/600 |
| Maximum pressure on material |
kg/cm2 | 1120/1750 | 1700/1120 |
| Screw R.P.M. | g/min. | 0-300 | 0-240 |
| Pre-plasticizing screw idraulic motor |
kW | 12 | 18 |
| Installed heating power | kW | 6,2 | 8,5 |
| Heating zones | n. | 3 | 3 |
| Electric motor power | kW | 18,5 | 22 |
| Installed total power | kW | 24,7 | 30,5 |
| Absorbed power | kW | 18 | 23 |
| Ejector power | tons. | 2,3 | 2,3 |
| Ejector running | mm | 80 | 110 |
| |
presma@presma.it
| injection moulding machines | moulding on inserts | presma recycling | special applications | | wheels | brushes & handles | footwear division | | all Presma machines | Presma in the world | | 70 years of history | information | HOME | map |
|
||
| web design & web hosting by GRAFF |